Product Categories

Contact Us

Add:No.2, House, No.21 Heyuan, Nanming District, Xinchang, Zhejiang Province, China

Contact:alex Lv

Tel:86-13758501000

Mob:86-13758501000

E-mail:alexlv@shengyicompany.com

official website in English: www.motorlongboard.com

Chinese website : http://www.benchwheel.com/

News

Home > News > Content
Introduction To The Performance Of Plug-in Valves For Electric Skateboard Parts
Sep 18, 2017

     The principle of the Electric Skateboard valve is that there is a round mouth with a diameter size on the gate. Through the opening and closing of the gate, the round mouth of the gate is completely detached and matched with the path. The advantage of this valve is that there is no groove in the valve body, the media will not obstruct plugging, and has a full diameter flow characteristics, suitable for powder granular media pipeline use.Electric Skateboard Parts

     Features: The shell and the main parts are all used in close casting, strong structure, high strength and no deformation, beautiful appearance, smooth and clean conveying channels, ensure smooth flow of materials, will not form a blockage; blade-type Gate design, closed by the slope force on the valve seat, good sealing; polishing accuracy can reach #, can reach food grade, drug grade requirement According to customer requirements to select a variety of materials: Stainless steel (SS304, ss304l, SS316, ss316l), carbon steel and so on; a variety of driving modes to choose from: Manual, Electric, pneumatic, board valve a variety of flange can be selected to turn: round flange and square flange; perfect control system can improve automation level, Ensure efficient operational reliability.Electric Skateboard Parts

    The skateboard valve should be inspected periodically to remove dirt and apply antirust oil on the machined surface. After installation, should be regularly inspected, main inspection items: sealing surface wear. Wear condition of trapezoidal thread of stem and stem nut. Whether the filler is obsolete or not, if any damage should be replaced in time. After the board valve is repaired and assembled, the sealing performance test should be carried out.Electric Skateboard Parts

    The operation of the skateboard valve, a variety of valve parts should be complete, intact. The bolts on the flange and the bracket are indispensable, the thread should be intact, and the loosening phenomenon is not allowed. The fastening nut on the handwheel, if found loose should be tightened in time, lest wear connection place or lose Handwheel and nameplate. If the handwheel is lost, it is not allowed to be replaced with a live wrench and should be matched in time. Padding gland does not allow skew or no pretension clearance.Electric Skateboard Parts



AddNo.2,House,No.21 Heyuan,Nanming District,Xinchang,Zhejiang Province,China

Contact:alex Lv

Tel:86-13758501000

Mob:86-13758501000

E-mail:alexlv@shengyicompany.com

Web:www.motorlongboard.com